Our Systems

Decorative Flake Flooring

Decorative flake flooring combines an epoxy base with broadcast vinyl chips and a clear protective topcoat. It is an option for homeowners and businesses that want a patterned floor with practical texture choices rather than a plain color.

Call 508-215-7536Email Us
Custom flake blend option 1 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 2 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 3 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 4 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 5 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 6 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 7 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 8 for an epoxy garage floor
One of more than 200 custom flake combinations
Custom flake blend option 9 for an epoxy garage floor
One of more than 200 custom flake combinations
Low-angle view of a gray, black and white flake epoxy floor under a high-gloss clear topcoat
Flake broadcast locked under a high-gloss clear topcoat
Gray flake epoxy floor coating carried up the walls with a coved base in an interior room
Flake carried up the walls with a coved base at the perimeter

Color Choices

Choose from over 200 flake combinations to find a blend that suits the room.

Layered Finish

Vinyl flake is broadcast into wet epoxy and finished with a clear topcoat.

Texture Planning

We discuss wet conditions, cleaning, and intended use before recommending the finish.

Sound Preparation

Decorative chips do not replace grinding, moisture checks, or concrete repairs.

Choose the blend and the working surface together

Color Balance

A blend combines several chip colors, so its overall appearance is different from a single paint color. Consider the surrounding walls, cabinets, and lighting when narrowing your choices. A sample is a useful starting point, not a substitute for discussing the full floor.

Visual Pattern

The pattern can make everyday dust and minor visual variation less noticeable than on a uniform surface. That does not mean the floor stays clean by itself. Dirt, grit, and spills still need regular attention even when they are less obvious.

Surface Texture

The finished texture depends on the whole system, including the broadcast and topcoat. We discuss grip and cleaning together because a floor should suit the people walking on it and the way it will be maintained.

With over 200 flake combinations available, the useful question is not simply which blend looks best in a small sample. Think about how the room is used and what you want to notice across the whole floor. A quieter blend may suit a garage with busy storage walls, while stronger contrast may be your preference in a simpler room. We can discuss those choices without suggesting that color changes the concrete underneath. Cracks, spalling, moisture concerns, and contamination still need assessment. The decorative layer belongs on a prepared slab, not over unresolved problems.

  • Patterned appearance: multiple chip colors give the surface visual variation rather than one uninterrupted field of color. The result can make small marks less conspicuous, but it should not be described as hiding every repair or defect.
  • Practical cleanup: the clear finish covers the broadcast layer and provides the surface you maintain. Regular removal of grit helps avoid unnecessary wear, especially near garage entries and frequently used walking routes.
  • Texture options: a flake system allows a discussion about surface feel and traction. Wet shoes, oil, and tracked-in water still affect footing, so no decorative finish should be treated as slip-proof.
  • Coordinated installation: preparation, repairs, epoxy application, broadcast, and clear coating are planned as one system. Choosing attractive chips is only one part of achieving a usable finished floor.

How we install an epoxy flake floor

  1. 1

    Inspect and prepare

    We review the slab, check moisture concerns, and identify existing coatings or contamination. After the area is cleared and swept, greasy spots receive appropriate attention and the concrete is diamond ground rather than acid etched.

  2. 2

    Repair the base

    Suitable cracks and spalled areas are prepared and patched before decorative work begins. We also discuss edges, door openings, drains, and joints so the finish has clear boundaries and necessary movement details are considered.

  3. 3

    Apply and broadcast

    The specified primer and epoxy coat provide the base for the selected flake blend. Vinyl chips are broadcast into the wet epoxy as part of the planned system rather than scattered onto a dry, finished floor.

  4. 4

    Finish the surface

    Once the broadcast layer is ready, loose excess material is removed and the surface is prepared for the clear topcoat. The final coating helps secure the flake and establishes the surface that will be cleaned and walked on.

  5. 5

    Wait for cure

    The coating needs its specified curing period before use. We explain the schedule for walking, moving belongings, and parking, with actual conditions considered rather than a blanket promise that every floor will be ready at the same time.

  • Residential garages where the owner prefers a patterned finish and can arrange temporary storage and parking during installation and curing.
  • Customer-facing business areas where decorative appearance matters, subject to a review of traffic, cleaning methods, moisture, and operational requirements.
  • Work and storage spaces where a flake finish suits the activities taking place. Equipment use and likely spills should be discussed before deciding that the appearance is the right fit.
Flake is decorative material within a coating system, not a crack repair or waterproofing method. It may soften the visual contrast of small surface variations, but it cannot stabilize moving concrete or solve water entering the space. We assess those conditions separately and explain any limits before recommending installation.

For an estimate, we consider the floor area, existing surface, repair needs, access, and selected finish. We provide a free on-site estimate so the preparation scope is based on your slab rather than an assumed condition. Ask about cleaning and texture while comparing blends, not after the floor is complete. Routine care generally starts with removing grit and using cleaning products suitable for the installed coating. Promptly clean spills, avoid dragging heavy objects, and keep entrance debris under control. A decorative pattern can make a room look more consistent, but sensible use and maintenance remain part of looking after the finished surface.

Frequently asked questions

What is flake flooring made of?

Our decorative flake floors use vinyl chips broadcast into wet epoxy and finished with a clear topcoat. The concrete beneath the system is prepared and repaired as needed before those layers are applied.

How many flake colors can I choose from?

We offer over 200 flake combinations. We discuss the overall blend and surrounding finishes so you can narrow the choices to something suitable for your space.

Is a flake garage floor slippery?

Texture can be considered when selecting the system, but no coating is slip-proof. Water, oil, and loose debris can affect footing and should be removed promptly.

Will flakes hide cracks in concrete?

The pattern can reduce the visual contrast of minor variations, but it does not repair cracks. Suitable cracks need preparation, and continuing movement can show through the finished system.

Is a flake floor hard to clean?

Routine care includes removing loose grit and cleaning with products suitable for the topcoat. We discuss texture and maintenance together because a more textured surface may need more attention during cleaning.

Want Decorative Flake Flooring in your space?

Send us the details and we will walk you through the system options, the prep your slab needs, and what the job involves.

Call 508-215-7536Email Us

Serving Central Massachusetts homeowners and businesses